The VC-50HD Remote Control Software (RCS) is a dedicated PC companion utility designed to configure and manage the Roland / Edirol VC-50HD Video Field Converter Go to product viewer dialog for this item.
. Because the physical hardware features a compact, portable design with limited on-device buttons, the software acts as the primary control dashboard to unlock the unit’s full processing potential. The top 5 features of the VC-50HD RCS Go to product viewer dialog for this item. 1. Bi-Directional Signal Routing
The software allows you to precisely configure the direction of video conversion. You can instantly map whether the unit is converting from HD/SD-SDI inputs into FireWire-ready IEEE1394 formats (like MPEG-2 TS or HDV), or receiving an i.LINK stream to output as clean SDI video. 2. Comprehensive Codec and Bitrate Selection
Through the utility dashboard, users can select precise target formats and compression ratios. This includes assigning bitrates such as MPEG-2 TS at 50/35/8Mbps or shifting down to standard HDV/DV formats (25/19Mbps) depending on whether your goal is high-quality production archiving or highly compressed, multi-hour field recording. 3. Advanced SDI Audio Channel Mapping
Managing audio streams wrapped inside professional video signals is fully handled in the software interface. Users can select and isolate specific embedded SDI audio channels, ensuring that the correct audio tracks are paired and encoded seamlessly into the output stream or sent out via the physical monitoring ports.
4. Customizable Hardware Presets and Dipswitch Assignability
To eliminate the need for a computer in the field, the software allows you to program and save custom configuration profiles. These software-defined parameter sets can then be permanently mapped to the physical hardware’s micro-dipswitches, allowing operators to recall complex routing settings instantly on location without booting up a PC. 5. USB Plugin Setup and Parameter Synchronization
The utility connects seamlessly over a standard USB 2.0 interface, offering immediate, real-time synchronization between the computer screen and the internal hardware processor. This plugin-and-play architecture provides a visual overview of active parameters, checking device states, and managing peripheral handshakes (like sync requirements for JVC Blu-ray recorders or field drives) before deployment. If you are setting up a workflow, let me know:
What source device (camera, switcher, deck) you are outputting from?
What destination platform (editing software, Blu-ray recorder, capture card) you are sending the signal to?
I can give you the exact software routing settings you’ll need! VC-50HD | Video Field Converter – Roland Pro A/V
Leave a Reply